|
International and US buyers, all prices in US $.
FarmerGPS Software US $ 349.-
Please ensure you provide an e-mail address!
------------------------------------------------------------------------------------------------
To integrate your equipments ON/OFF signal (12V) select the
interface box:
This device allows you to integrate a 12V ON/OFF signal from your
seeder, sprayer or any other equipment into FarmerGPS. FarmerGPS
will then automate the F2-key and indicate on the map where your
equipment was ON or OFF. This may also be used with pressure switches
or any other 12V indication of the equipments ON/OFF status. Comes
with 2 * 5-pin connectors.
The device uses optoisolators to seperate electric circuits of
your equipment and the serial port of your laptop.
- FarmerGPS interface ON/OFF box US $ 120.-
-------------------------------------------------------------------------------------------------------------------
To integrate your equipments ON/OFF signal (12V) and up to
3 booms select the interface boom box :
This device functions the same as the ON/OFF box, however it adds
support for up to 3 boom sections in FarmerGPS. Connect 12 V ON/OFF
indicators for your boom sections and FarmerGPS will draw coverage
areas accordingly. Comes with 2 * 5-pin connectors.
- FarmerGPS interface 3-boom box US $ 165.-
-----------------------------------------------------------------------------------------------------------------------
To integrate your equipments ON/OFF signal (12V) and up to
10 booms select the USB interface boom box :
This device functions the same as the ON/OFF box, however it adds
support for up to 10 boom sections in FarmerGPS. Connect 12 V ON/OFF
indicators for your boom sections and FarmerGPS will draw coverage
areas accordingly. While the ON/OFF and the 3-boom interface typically
go into the signal line of the GPS-receiver, the USB-interface box
connects to a USB-port on your laptop. Comes with a 15-pin d-sub
connector.
- FarmerGPS USB-interface 10-boom box US $ 225.-
Novatel has released a new antenna specifically designed for
the agriculture market. The NovAtel Smart-AG.
Specifications on the Smart-AG can be found at http://www.novatel.com/products/smart-ag.htm
We are currently not offering any other GPS-receivers, however
keep in mind that you can use any NMEA capable GPS receiver with
FarmerGPS. A very low cost entry type receiver is the Garmin 18X-5Hz
version for around $ 200.- and a number of our customers use this
receiver. If you do require great accuracy, the Novatel Smart-AG
is one of the best choices for WAAS GPS receivers in our opinion.
Novatel Smart-AG pricing (can only be purchased with a FarmerGPS
software package):
- SMART-AG-PVT-S GPS Code Positions
- SMART-AG cable (1 serial port, 12V cigarette lighter adapter and 2 bare wires for radar speed emulation)
-------------------------------------------------------------------------------------------------------------------
Newer laptops no longer provide a RS232 interface. The USB-RS232
converter will install a virtuell RS232 port and has been tested
with FarmerGPS.
USB-RS232 converter cable US $ 36.-
-------------------------------------------------------------------------------------------------------------------
Complete FarmerGPS package 1 US $ 1464.- :
- FarmerGPS software
- FarmerGPS interface ON/OFF box
- Novatel Smart-AG PVT-S receiver
- Cable from GPS receiver to integration device
- USB-RS232 converter cable
-------------------------------------------------------------------------------------------------------------------
Complete FarmerGPS package 2 US $ 1499.- :
- Same as package 1 but with interface 3-boom box
-------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------
Complete FarmerGPS package 3 CAN $ 1599.- :
- Same as package 1 but with usb-interface box 10-boom
Please e-mail FarmerGPS@hotmail.com
for questions.
You may also call us at 780 990 4052.
|